Kawai MP11 Owner'S Manual Download Page 70

Page: 70 / 136

Loading an SMF file into memory

(cont.)

3. Selecting the Load SMF function

Press the F3 function button (LOAD).

A listing of the SMF files stored in the root folder of the USB
device will be shown in the LCD display.



USB device file/folder listing screen

The MP11’s file/folder listing screen lists relevant files and
folders stored in the root of the USB device.

Previous

folder

Folder

File

Selection

cursor

Press the CURSOR



buttons to move the selection cursor.

* Control knob A can also be used to move the selection cursor.

Press the F4 function button (EXEC) or +/YES button to select
the file or enter the selected folder.

4. Selecting the SMF file to load

Press the CURSOR



buttons to select the desired MIDI file.

Press the F4 function button (EXEC) or +/YES button.

The Load SMF screen will be shown in the LCD display.

Song Recorder

(Internal Memory)

Move

selection

cursor

Select file/folder

Summary of Contents for MP11








































































































































Search results

Summary of Contents for MP11

Reviews:

Kawai MP11, Owner'S Manual, Page: 70 / 136

Search results

Summary of Contents for MP11

Reviews: