manualshive.com logo in svg

Kawai MP11, Owner'S Manual, Page: 3 / 136

Share
Download
Kawai MP11 Owner'S Manual Download Page 3

Thank you for purchasing this Kawai MP11 stage piano.

This owner’s manual contains important information regarding the instrument’s usage and operation.
Please read all chapters carefully, keeping this manual handy for future reference.

 About this Owner’s Manual

Before attempting to play this instrument, please read the 

Introduction

 chapter from page 10 of this owner’s manual.  This chapter 

provides a brief explanation of each section of the MP11’s control panel, an overview of its various jacks and connectors, and details 
how the components of the instrument’s sound are structured.

The 

Main Operation

 chapter (page 20) provides an overview of the instrument’s most commonly used functions, beginning with 

turning sections on and off, adjusting their volume, and selecting sounds.  Later on, this chapter introduces basic sound adjustment 
using the four control knobs, before examining how EFX, reverb, amp simulation, and EQ can all be applied to dramatically change 
the character of the selected sound.  The chapter closes with an explanation of the instrument’s MIDI OUT section.

The 

EDIT Menu

 chapter (page 38) lists all available PIANO, E.PIANO, SUB, and MIDI OUT section parameters by category for convenient 

reference.  

The STORE Button & SETUP Menus 

chapter (page 59) outlines storing customised sounds, capturing the entire panel 

configuration as a SETUP, then recalling different SETUPs from the MP11’s internal memory.

The 

Recorder

 chapter (page 63) provides instructions on how to record and play back pieces stored both in the instrument’s internal 

memory, and also MP3/WAV audio files saved to USB memory devices.  This chapter also explains the MP11’s metronome/drum 
pattern functions.  Additional USB functions are covered in greater detail in the 

USB Menu

 chapter (page 92), while the 

SYSTEM 

Menu

 chapter (page 98) explains the MP11’s System Settings and various reset functions.

Finally, the 

Appendix

 section (page 108) includes USB-MIDI driver information, software update instructions and listings of the 

instrument’s internal sounds and drum rhythms, effects, MIDI reference information, and full specification details.

Summary of Contents for MP11









































































































































Reviews:

No comments