Instructions for use SMARTtorque S609 C - 1.008.1644 SMARTtorque Mini S605 C - 1.008.1645 SMARTtorque
S608 C - 3.001.6560
7 Processing steps in accordance with ISO 17664 | 7.3 Automated processing
18 / 26
7.2.2 Manual external disinfection
WARNING
Incomplete disinfection.
Infection hazard.
▶
Only use disinfection procedures that are verified to be bactericidal, fungici-
dal and virucidal.
▶
If the disinfectants used do not meet these requirements, the process must
be concluded by disinfection of the unit(s) without packaging using a steril-
izer.
NOTICE
Never disinfect the handpiece with chlorine-containing products.
Functional damage and property damage.
▶
Only disinfect in a washer disinfector or manually.
KaVo recommends the following products based on material compatibility. The
microbiological efficacy must be ensured by the disinfectant manufacturer and
proven by an expert opinion.
Approved disinfectants:
▪ CaviWipes and CaviCide made by Metrex
Consumables required:
▪ Cloths for wiping the medical device.
▶
Spray the disinfectant on a cloth, then wipe down the medical device and
allow the disinfectant to act in accordance with the instructions of the
disinfectant manufacturer.
▶
Comply with the instructions for use of the disinfectant.
7.2.3 Manual drying
▶
Clean the outside and inside with compressed air until no drops of water are
visible.
▶
Immediately after drying, lubricate the KaVo medical device with care
agents from the KaVo care system.
See also:
2
7.4 Care products and systems - Servicing, Page 19
7.3 Automated processing
WARNING
Incomplete disinfection.
Infection hazard.
▶
Only use disinfection procedures that are verified to be bactericidal, fungici-
dal and virucidal.
▶
If the disinfectants used do not meet these requirements, the process must
be concluded by disinfection of the unit(s) without packaging using a steril-
izer.
Summary of Contents for SMARTtorque S609 C
Page 25: ......
