Instructions for use SMARTmatic S10 REF 1.011.6730 SMARTmatic S10 K REF 1.011.6731 SMARTmatic S10 S REF
1.011.6732
2 Safety | 2.1 Infection hazard
2 Safety
The instructions for use are a component of the product and must be read carefully
prior to use and be accessible at all times.
The device may only be used in accordance with the intended use, any other type of
use is not permitted.
2.1 Infection hazard
Patients, users or third parties can be infected by contaminated medical devices.
▶ Take suitable personal protective measures.
▶ Follow the instructions for use of the components.
▶ Before initial startup and after each use, process and sterilize the medical device
and accessories appropriately.
▶ Carry out the cleaning and sterilization as described in the instructions for use.
The procedure has been validated by the manufacturer.
▶ If you deviate from this procedure, it is essential to ensure the effectiveness of the
cleaning and sterilization.
▶ Prior to disposal, the product and accessories must be appropriately processed or
sterilized.
▶ In the case of injury to soft tissue, do not continue treatment in the oral cavity with
instruments driven by compressed air.
▶ To test, use and remove the tool, use a glove or finger guard.
2.2 Technical condition
A damaged device or components can injure patients, users and third parties.
▶ Use the device and components only if there is no damage on the outside.
▶ Check that the device is working properly and is in satisfactory condition before
each use.
▶ Have parts with sites of breakage or surface changes checked by the Service.
▶ If the following defects occur, stop working and have the service personnel carry
out repair work:
▪ Malfunctions
▪ Damage
▪ Irregular running noise
▪ Excessive vibration
▪ Overheating
▪ Tool is not seated firmly in the handpiece
To ensure optimum function and to prevent property damage, you have to comply with
the following instructions:
▶ Service the medical device with care products and systems regularly as described
in the instructions for use.
▶ The device should be cleaned, serviced and stored in a dry location, according to
instructions, if it is not to be used for an extended period of time.
High torque of micromotors can lead to severe burn injuries.
▶ Service micromotors regularly.
▶ Do no use any damaged motors.
7 / 30
