Instructions for use SMARTmatic S10 REF 1.011.6730 SMARTmatic S10 K REF 1.011.6731 SMARTmatic S10 S REF
1.011.6732
7 Processing steps in accordance with ISO 17664 | 7.5 Drying
7.4.1 Manual external disinfection
KaVo recommends the following products based on material compatibility. The micro-
biological efficacy must be ensured by the disinfectant manufacturer and proven by
an expert opinion.
▪ CaviCide made by Metrex
Consumables required:
▪ Cloths for wiping the medical device.
▶ Spray the disinfectant on a cloth, then wipe down the medical device and allow
the disinfectant to act in accordance with the instructions of the
disinfectant manufacturer.
Note
Comply with the instructions for use of the disinfectant.
7.4.2 Manual internal disinfection
Not applicable.
This product is suitable for automated disinfection only.
7.4.3 Automated external and internal disinfection
▶ For program settings as well as cleansers and disinfectants to be used, please re-
fer to the Instructions for Use of the washer disinfector.
▶ In order to prevent negative effects on the KaVo medical device, make sure that
the interior and the exterior of the medical device are dry after completion of the
cycle, and then lubricate it immediately with care products from the KaVo care
system.
7.5 Drying
Manual drying
▶ Clean the outside and inside with compressed air until no drops of water are visi-
ble.
Automated drying
The drying procedure is usually part of the cleaning program of the washer disinfector.
▶ Please comply with the instructions for use of the washer disinfector.
7.6 Care products and systems - Servicing
WARNING
Sharp bur in the medical device.
Risk of injury from sharp and/or pointed bur.
▶ Remove bur.
21 / 30
