KaVo K-Control TLC 4955, Instructions For Use Manual

Page: 27 / 36

Instructions for use K-Control TLC 4955, 4956, 4957
5 Operation | 5.2 Operating the foot control
Note
The speed and torque settings can be modified in the usual way.
See also:
2 5.1.3 Setting the speed, Page 26
2
5.1.4 Setting the torque, Page 26
▶ Press the pushbutton for approx. 3 seconds to save the current speed and torque
settings (clockwise rotation) in the current program.
ð
The display flashes once.
5.2 Operating the foot control
5.2.1 Controls on the foot control
Operating the foot control
① Bar indicator for speed ② Bar indicator for torque
③ Status LED for program display (4-col-
our)
④ LED for CCW rotation
⑤ Program selection/speed selection
button
⑥ CCW rotation/torque selection button
⑦ Foot pedal
5.2.2 Turn on the control
Note
When the device is turned on, the speed limiting is activated for safety reasons
(max. 30,000 rpm) even with saved programs.
▶ Connect the power line.
ð
A corresponding number of LEDs light up on the bar indicator for one second to in-
dicate the control's software version in binary form similar to an error display.
ð
This will be followed by the values of the last program set, with the stored max.
speed and max. torque.
ð
The status LED lights up in the colour allocated to the program.
See also:
2
7 Troubleshooting, Page 31
Note
Press the foot pedal to start the motor and adjust the speed in the range between
the motor's min. speed and the max. speed setting.
27 / 36