KaVo K-Control TLC 4955, Instructions For Use Manual

Page: 20 / 36

Instructions for use K-Control TLC 4955, 4956, 4957
4 First use | 4.2 Nominal voltage - Nominal frequency
20 / 36
4.2 Nominal voltage - Nominal frequency
▶ Test whether rated voltage and rated frequency comply with specifications on the
rating plate.
4.3 Location
Note
This KaVo product must be set up on a level, stable, horizontal surface and its se-
cure footing must be ensured. Do not set up right next to the edge of the table. Con-
necting cables, connections to motorised handpieces and foot control must be
routed safely. Avoid creating tripping hazards.
4.3.1 Knee control K-Control TLC 4955
▶ Drill holes for the mounting bracket on the side of the enclosure.
Position of holes for mounting bracket
① Distance from upper edge: 93 mm ② Hole spacing: 156.5 mm
③ Distance from leading edge: 53 mm
▶ Screw the mounting rail into place and attach the knee control unit to it.