KaVo K-Control TLC 4955, Instructions For Use Manual

Page: 10 / 36

Instructions for use K-Control TLC 4955, 4956, 4957
2 Safety | 2.2 Safety instructions
10 / 36
CAUTION
Improper maintenance or repair of the unit.
Damage to and malfunction of the unit.
▶ Repair and servicing work on the electronic part of the unit may be done only by
skilled staff or KaVo-trained technicians.
▶ Use original KaVo spare parts only.
Users have a duty to:
▪ Only use equipment that is operating correctly
▪ Protect themselves and others against hazards.
The following persons are authorised to repair and service the KaVo product:
▪ Technicians of KaVo branch offices after appropriate product training.
▪ Specifically KaVo-trained technicians of KaVo franchised dealers.
KaVo shall not be responsible for damage caused by:
▪ external influences, poor media quality or faulty installation.
▪ The use of incorrect information.
▪ repair work carried out incorrectly.
Note
Any waste which is generated must be recycled or disposed of in strict compliance
with all applicable national regulations in a manner which is safe both for people
and the environment.
If you have any questions regarding proper disposal of the KaVo product, please
contact the KaVo branch.
2.2.2 Product-specific
WARNING
Injury or damage from damaged functional parts.
Damage to functional parts can cause further damage or personal injury.
▶ Check the device, electrical cables and any accessories for possible damage to
the insulation and replace if necessary.
▶ If functional parts are damaged: discontinue your work and repair the damage or
notify a service technician!
WARNING
Vapours, chips and dust may be produced during the processing of various materials.
These can damage the eyes and airways.
Use protective goggles and respiratory protection and suitable dust extraction as
needed.
CAUTION
Damage by liquids.
Faults on electrical components.
▶ Protect openings of the product from any ingress of liquids.
▶ Do not continue using the device and contact Customer Service, if there is any in-
gress of liquid into the device.