KaVo INTRAflex LUX 2 Series Instructions For Use Manual Download Page 17

Page: 17 / 88

The following individuals are authorized to repair and service KaVo prod‐

ucts:

▪ Technicians at KaVo branches throughout the world
▪ Technicians specially trained by KaVo

To ensure proper function, the medical device must be set up according to

the reprocessing methods described in the KaVo Instructions for Use, and

the care products and care systems described therein must be used. KaVo

recommends specifying a service interval at the dental office for a licensed

shop to clean, service and check the functioning of the medical device.

This service interval depends on the frequency of use and should be adjus‐

ted accordingly.
Service may only be carried out by KaVo-trained repair shops using origi‐

nal KaVo replacement parts.

2 Safety

17 / 88

Summary of Contents for INTRAflex LUX 2 Series

























































































Search results

Summary of Contents for INTRAflex LUX 2 Series

Reviews:

Related manuals for INTRAflex LUX 2 Series

Brands by name

Popular brands

KaVo INTRAflex LUX 2 Series, Instructions For Use Manual

Search results

Summary of Contents for INTRAflex LUX 2 Series

Reviews:

Related manuals for INTRAflex LUX 2 Series

Brands by name

Popular brands