Technician's instructions GENTLEpower LUX Contra-angle 25 LP - REF 1.001.2849
2 Disassembly | 2.1 Disassembly of the GENTLEpower LUX Angle Piece 25 LP
8 / 20
2.1.5 Disassembling the insert
Tool
Name
Wrench (Mat. no. 1.002.0321)
▶ Take out the slide ② and pressure spring ①.
▶ Unscrew the filter ③ with the wrench and remove the O-ring ④.
2.1.6 Disassembling the elbow sleeve
Tool
Name
Puller (Mat. no. 1.002.7470)
Note
Take care not to damage the fibre-optic conductor when disassembling the elbow
sleeve.
▶ Use a hot-air blower to heat up the glued joint on the fibre-optic conductor ⑥ and
the glued joints on the elbow sleeve ⑧.
▶ Insert the puller into the front of the spray sleeve ⑦, force the tension tabs apart
with the swivel and slowly screw in the threaded spindle of the puller to loosen
and extract the spray sleeve ⑦.
▶ Screw back the threaded spindle of the puller and remove the puller.
