manualshive.com logo in svg

KaVo EWL 4452, Operating Instructions Manual, Page: 52 / 62

Share
Download
KaVo EWL 4452 Operating Instructions Manual Download Page 52

Configuration

P135-f_rem_min

Minimum rated frequency for analogue rated frequency default AIN1 at V_e = 0V. This parameter is evaluated
only if 

P130-analogue AIN1

is configured for rated frequency.

By means of parameter 

P8-speed displ

, this parameter can be changed from frequency display to speed

display, the number of poles of the motor 

P96-no. of poles

being taken into account.

Minimum value:

0 Hz

Maximum value: 3000 Hz
Factory setting:

0 Hz

P136-f_rem_max

Maximum rated frequency for analogue rated frequency default AIN1 at V_e = 10V. This parameter is evaluated
only if 

P130-analogue AIN1

is configured for rated frequency.

By means of parameter 

P8-speed displ

, this parameter can be changed from frequency display to speed

display, the number of poles of the motor 

P96-no. of poles

being taken into account.

Minimum value:

0 Hz

Maximum value: 3000 Hz
Factory setting:

3000 Hz

P137-f_stop_ana

Stop frequency from analogue rated frequency signal; this makes it possible to achieve an automatic motor stop
with counterclockwise rotation of the nominal value potentiometer or analogue voltage 0 V.
The motor is automatically stopped if the rated frequency default at analogue input AIN1 falls below the value of
this parameter. By means of parameter 

P8-speed displ

, this parameter can be changed from frequency

display to speed display, the number of poles of the motor 

P8-no. of poles

being taken into account.

In this context, also see the parameter 

P135-f_rem_min

and 

P136-f_rem_max

.

Values:

[0] 

off

- no automatic stop

[1] 

f_mot_min

- the value from 

P41-f_mot_min

is used

Minimum value:

2 Hz

Maximum value: 3000 Hz
Factory setting:

off

P150-end

(display value)

Last parameter number; serves as end mark.

50

Summary of Contents for EWL 4452































































Reviews:

No comments