Instructions for use ERGOcom 3
4 Start-up
|
4.2 Setting up the RF receiver for ERGOcom 3 excellence
4.2 Setting up the RF receiver for ERGOcom 3 excellence
4.2.1 Select channel
You can set up to 38 channels. Channels show which KaVo wlink devices are
connected to which specific ERGOcom 3.
It is advisable to select the channel number that corresponds to the treatment room
number: e.g. channel 1 for treatment room 1.
▶ Hold down the Channel Selection / Learn Channel Mode button for < 2 seconds.
The channel selected appears on the status display.
Note
If no entry is made within 8 seconds, the ERGOcom 3 returns to operating mode.
The channel is saved following the learn channel procedure or by resetting
ERGOcom 3 (turning main switch off/on).
If a channel changes, all channels have to be reprogrammed.
▶ Select the required channel using navigation.
Note
If no entry is made within 8 seconds, the ERGOcom 3 returns to operating mode.
This saves the last setting on the status display.
17/54
