KaVo ERGOcam One Instructions For Use Manual Download Page 6

Instructions for use ERGOcam One

1 User Notes | 1.3 Terms and conditions of warranty

6 / 30

1.2.1 Technical customer service

The technical support for KaVo products is primarily offered by the dental supplier.
KaVo provides ongoing training and special courses for dealer technicians.
To guarantee constant readiness for use and maintenance of value of the KaVO
products, the products must be regularly serviced.

1.3 Terms and conditions of warranty

KaVo provides the final customer with a warranty that the product cited in the han-
dover certificate will function properly and guarantees zero defects in the material or
processing for a period of 12 months from data of purchase, subject to the following
conditions:
Upon justified complaints of flaws or a short delivery, KaVo will make good its war-
ranty by replacing the product free of cost or repairing it according to the customer's
wishes. Other claims of any nature whatsoever, in particular with respect to compens-
ation, are excluded. In the event of default and gross negligence or intent, this shall
only apply in the absence of mandatory legal regulations to the contrary.
KaVo cannot be held liable for defects and their consequences due to natural wear,
improper cleaning or servicing, non-compliance with operating, servicing or connection
instructions, calcification or corrosion, contaminated air or water supplies or chemical
or electrical factors deemed abnormal or impermissible in accordance with factory
specifications.
The warranty does not usually cover bulbs, glassware, rubber parts and the colour-
fastness of plastics.
Defects or their consequences that can be attributed to interventions on or changes
made to the product by the customer or a third party are excluded from the warranty.
Claims from this warranty can only be asserted when the transfer form (copy) belong-
ing to the product has been sent to KaVo, and the original can be presented by the op-
erator or user.

1.4 Transportation and storage

1.4.1 Currently valid packaging regulations

Note

Only valid for the Federal Republic of Germany.

Dispose of and recycle the sales packaging appropriately in accordance with current
packaging regulations, employing waste management or recycling companies. Com-
ply with the comprehensive return system. KaVo has had its sales packaging licensed
for this purpose. Please comply with the regional public waste-disposal system.

1.4.2 Damage in transit

In Germany

If the packaging is visibly damaged on delivery, please proceed as follows:

1. The recipient of the package must record the loss or damage on the delivery re-

ceipt. The recipient and the representative of the shipping company must sign this
delivery receipt.

Summary of Contents for ERGOcam One































Reviews: