Instructions for use ERGOcam One
4 Commissioning | 4.1 Connecting the camera
18 / 30
4 Commissioning
Note
A PC is required for the operation of the camera (not included in the delivery)
Note
The ERGOcam One may only be used on equipment which at least fulfil the stand-
ard EN DIN ISO 60950.
Note
The distance between the PC and camera cable (floor terminal box) must not ex-
ceed 10 m. High-quality, active USB extension (maximum 5 m long each) must be
used. (KaVo recommends one or two USB extensions 5m Mat. no. 1.004.6953)
4.1 Connecting the camera
4.1.1 Dentist element
▶ Insert the USB plug of the camera at the connection.
CAUTION
The connecting cable is firmly connected to the camera handpiece.
Product damage
▶ Do not remove the connecting cable from the camera handpiece.
Note
Defective camera function.
The camera can indicate a defective function if the PC, to which the camera is con-
nected, is set in into idle, standby or hibernation mode.
▶ Turn off the PC and switch off.
Summary of Contents for ERGOcam One
Page 1: ...Instructions for use ERGOcam One...
Page 28: ......
Page 29: ......
Page 30: ...1 011 3682 Fk 20160810 2 en...
