with the dentist unit, and two automatic positions can be retrieved with the multi-
functional foot control.
Retrieve the patient simulator positions with the dentist unit
▶ Briefly press the LP/AP button.
The LEDs of the buttons "AP 0", " AP 1", " AP 2" and "SP" flash for about four
seconds.
▶ During these four seconds, briefly press the "AP 0", " AP 1", " AP 2" or "SP"
buttons.
The patient simulator moves into the automatic position.
Retrieve the patient simulator positions with the foot control
Note
If an instrument is removed, the chair functions of the foot control are blocked.
The blocking can be removed by briefly pressing the stirrup switch. The functions
are then available.
① Spray preselection/AP footswitch
③ Foot pedal
② Footswitch blowing air/AP (optional)
The patient simulator positions can be retrieved with two footswitches; the stand‐
ard setting is as follows:
▪ "Spray default" foot button: "LP" automatic position (last position)
▪ "Blown air" foot button: "SP" automatic position (rinsing position)
Retrieve the positions when the instrument is mounted
▶ Press the "Preselected spray" or "Blown air" foot switch.
The patient simulator moves into the automatic position.
Instructions for use DSEclinical Typ 5197 / DSEclinical Typ 5197eH
5 Operation | 5.16 Electrically position the patient simulator (optional kit)
39/48
