9.11
Automatic clamping of tensioning pin
▶ Make sure that the tensioning pin is placed at position 0 of the tool magazine.
▶ Close the door of the machine.
▶ Tap the "Maintenance" > "Chuck" > "Get Tensioning Pin" buttons successively
in the "Service" menu.
This makes the machine get the tensioning pin and perform a laboratory meas‐
urement.
9.12
Carry out the spindle warm up
Once the spindle mounting process is completed, a single spindle test run needs
to be performed.
Technician's instructions KaVo ARCTICA Engine
9 Mounting the spindle | 9.11 Automatic clamping of tensioning pin
62/106
Summary of Contents for ARCTICA Engine
Page 1: ...Technician s instructions KaVo ARCTICA Engine Always be on the safe side...
Page 109: ......
Page 110: ...1 009 6427 kf 20120916 01 en...