KaVo 1.008.5400, Instructions For Use Manual

Page: 14 / 34

Instructions for use MASTERtorque LUX M9000 L - 1.008.7900 MASTERtorque LUX M9000 LS - 1.008.5400
4 Start up and shut down | 4.1 Installing the MULTIflex coupling in the M9000 L
14 / 34
4 Start up and shut down
WARNING
Hazard from non-sterile products.
Infection hazard for dentist and patient.
▶
Prior to initial startup and after each use, reprocess the product and
accessories.
See also:
2 7 Reprocessing steps in accordance with ISO 17664, Page 22
WARNING
Dispose of the product in appropriate manner.
Infection hazard.
▶
Reprocess and sterilise the product and accessories before disposal.
See also:
2 7 Reprocessing steps in accordance with ISO 17664, Page 22
NOTICE
Damage from soiled and moist cooling air.
Contaminated and moist cooling air can cause malfunctions.
▶ Make sure that the supply of cooling air is dry, clean, and uncontaminated
according to EN ISO 7494-2.
4.1 Installing the MULTIflex coupling in the M9000 L
WARNING
Detachment of the medical device during treatment.
A medical device that is not properly locked can release from the MULTIflex
coupling during treatment.
▶ Before each use, check if the medical device is securely locked onto the
MULTIflex coupling.
▶
Screw the MULTIflex coupling onto the turbine hose and tighten it with the
wrench
Mat. no. 0.411.1563 .
▶
Rotate the spray ring on the MULTIflex coupling in order to regulate the wa-
ter supply.
4.2 Checking the amount of water
CAUTION
Overheating of the tooth due to insufficient amount of cooling water.
Insufficient spray water can cause the medical device to overheat and damage
the pulp and tooth.
▶ Adjust the water amount for the spray cooling to a minimum of 50 ml/min
(3.1 inch
3
).
▶ Check spray water channels and if necessary clean spray nozzles with the
nozzle needle (
Mat. no. 0.410.0921 ).
▶ Check water filter and replace, if necessary.