background image

Instructions for use INTRA K-LUX 200 - 1.000.6717 | INTRA K-LUX 200 F - 1.002.1912

9 Warranty terms and conditions

9 Warranty terms and conditions

The following warranty conditions apply to this KaVo medical device:

KaVo provides the end customer with a warranty of proper function and guar-
antees zero defects in respect of material and processing for a period of 36
months from the date of the invoice, subject to the following conditions:
In case of justified complaints, KaVo will honour its warranty with a free re-
placement or repair. Other claims of any kind whatsoever, in particular with re-
spect to compensation, are excluded. In the event of default, gross negligence
or intent, this shall only apply in the absence of mandatory legal regulations to
the contrary.
KaVo shall not be liable for defects and their consequences that have arisen or
may arise from natural wear, improper handling, cleaning, maintenance or ser-
vicing, non-compliance with operating, maintenance or connection instructions,
calcination or corrosion, contaminated air or water supplies or chemical or elec-
trical factors deemed abnormal or impermissible in accordance with KaVo's in-
structions for use or other manufacturer's instructions. The warranty granted
does not usually extend to lamps, optical fibres made of glass and glass fibres,
glassware, rubber parts, and the colourfastness of plastic parts.
All liability is excluded if defects or their consequences originate from manipula-
tions of or changes to the product made by the customer or a third party that is
not authorised by KaVo.
Warranty claims will only be accepted if the product is submitted along with
proof of purchase in the form of a copy of the invoice or note of delivery. The
dealer, purchase date, type, and serial number must be clearly evident from
this document.

23 / 26

Summary of Contents for 1.000.6717



























Reviews: