background image

1.  Prior to use, ensure all operating procedures have been 

read and understood.

2.  This fall arrest system is only to be used by competent 

persons who have experience and training in the safe use 
of the system and associated equipment.

3.  Ensure all workplace WHS requirements are identified 

and understood. A risk assessment with a safe work 
method procedure must be completed and approved by 
management prior to work commencing.

4.  This system requires periodic inspection and 

maintenance by a qualified height safety inspector. The 
system MUST NOT be used if the service date is overdue.

5.  A rescue plan must be devised and be ready to be 

implemented prior to usage of a fall arrest system.

6.  Authorisation to access any risk area must be obtained 

from the person in control of the workplace.

7.  Only approved full body harness, gear and equipment 

with energy absorber certified to Australian and New 
Zealand Standard AS/NZS 1891, to be used with this 
system. 

8.  Visually inspect the system for damage prior to use. 

System must not be used if there is any deterioration or 
deformation of any components or structure to which the 
system is attached.

9.  If the safety system is damaged or has arrested a fall, 

discontinue use until it has been fully inspected and 
recertified by a competent height safety equipment 
inspector.

10.  Ensure all fixings, fittings and components are 

securely attached. Any tightening and replacement of 
components must be carried out by a competent height 
safety inspector.

11.  Persons must not be allowed to work alone in fall arrest 

situations in case emergency rescue assistance or first 
aid is required.

12.  All applicable Australian Standards, WHS Acts & 

Regulations, and Codes of Practice & Guidelines must be 
read and obeyed when using this safety system.

13.  This operation manual does not in any way, replace 

the need for completion of a recognised height safety 
training course by a Registered Training Organisation 
(RTO).

OPERATION 

REQUIREMENTS

Failure to follow all warnings, operation and 
maintenance instructions may result in serious injury 
or death.

Must be read prior to use

Copyright, trademarks and product codes are property of Kattsafe. Patents and 
design registrations may apply to these products.

4

Kattsafe / Vertical fall arrester / Operation manual

Summary of Contents for SL228














Reviews: