background image

TECHNICAL 

SPECIFICATION

Vertical fall arrester
SL228

The vertical fall arrester for safe access up vertical ladders for maintenance personnel. System design, supply, layout, 
installation and certification by a Kattsafe approved installer, as per the manufacturer’s installation instructions and current 
standards.

Materials

 

– Shuttle: stainless steel (316)

 

– Energy absorber lanyard: polyester webbing

 

– Vertical line cable: stainless steel (316)

 

– Cable end terminations: stainless steel (316)

Dimensions

 

– Shuttle: 100mm (L) 44mm (W)

 

– Energy absorber: 130mm (static length)

 

– Vertical line cable: 8mm (7 x 7 strand)

Weight

0.90kg (shuttle including energy absorber) 

Fixings (refer to installation manual)

 

– Structural steel fixing - M10 bolt set

 

– Concrete fixing - M10 mechanical concrete anchor

 

– Metal purlin fixing - 14G tek screw

Rating

 

– 140kg max weight

 

– 6kN rated - Single person use (in conjunction with energy 

absorber lanyard device).

Compliance

The vertical fall arrester is designed to conform with 
requirements of Australian and New Zealand Standards 
AS/NZS 1891.4.2009 and codes of practice and guidelines.

Testing

Testing and performance based on requirements of 
Australian and New Zealand Standard AS/NZS 1891.4:2009.

 

– Dynamic load tested: 12kN

 

– Resultant load on structure: 5.85kN

Product warranty

3 Years from date of purchase subject to correct 
installation. Use and maintenance to be in accordance with 
manufacturer’s specifications and recommendations. (This 
excludes wearing parts).

Inspection and maintenance

Inspection and certification required every 12 months by 
competent person in accordance with manufacturer’s 
specifications and requirements of Australian and New 
Zealand Standard AS/NZS 1891 (refer installation manual).

Important note

Failure to supply and/or install proprietary product in 
accordance with above standards and codes, specifications 
and instructions voids complete system certification and/or 
warranty.

Copyright, trademarks and product codes are property of Kattsafe. Patents and 
design registrations may apply to these products.

11

Kattsafe / Vertical fall arrester / Operation manual

Summary of Contents for SL228














Reviews: