manualshive.com logo in svg

Kathrein UFS 923, Operating Manual

Share
Download
Kathrein UFS 923 Operating Manual Download Page 79

79

Main menu -  Edit channel list

None of the changes to the channel lists and favourites lists that you can carry out 
and which are described in the following chapter are saved by the receiver unless, 

when you exit the menu by pressing the 

 button, you answer “Yes” to the ques-

tion “Save changes?” using the 

 button. If you answer “No, do not save the changes”, all the 

settings / changes you made will be discarded and not saved.

 Opening the menu

From the TV picture, press the 

 button to open the main menu. Now select “Edit channel list” using the 



 buttons and con

fi

 rm the call up from the menu using the 

 button. The following on-screen 

display will appear:

The receiver will notify you that the editing 
options in the menu can be called up using 

the 

 button. If you do not want to see 

this noti

fi

 cation again next time you call it 

up, press the 

 button. If you do, you 

can press the 

 button.

You can also make changes to the channel list via your PC/laptop using “DVR Manager” by Kath-
rein. The software is available free-of-charge for download from Kathrein. Software and instruc-
tions are available at:
www.kathrein.de 

→

 “Service” 

→

 “Software and Downloads” 

→

 “Receiver” 

→

 “UFS 923”.

Tipp!

Summary of Contents for UFS 923





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands