Kathrein UFS 923, Operating Manual

Page: 39 / 148

39
Electronic Programme Guide (EPG)
Views using the EPG
”Current” view
The “Current” view can be called up at any
time in the EPG by pressing the

(green)
button. In the “Current” view all channels
are displayed in the order of the complete
channel list. Providing EPG data has been
supplied/transmitted by tvtv or by the chan-
nel provider, the receiver will show the cur-
rent programme running on each channel
with start time,
fi nish time, duration and a
progress bar.
You can use the cursor buttons (

) or the number pad to select the desired channel and, if available, you
can use the

button to display further information on the desired programme.
If you want to view the programme currently being shown on a channel, there is no need to exit the EPG
- just select the desired channel and press the

button. At the top right of the screen you will see the cur-
rent TV picture for the selected channel. The picture only appears once the

button has been pressed
however. Prior to this you will see the picture from the old channel that was previously selected even though
the EPG was no longer set to this channel.
The

button allows you to look ahead to future programmes on the channels in 15 minute steps (press
the

button to return to the current time).
By pressing the

(green) button in the
“Current” view, you can display a schedule
in 15-minute steps (see screenshot on the
right). The desired time is selected using
the cursor buttons (

) and con fi rmed
using the

button.
“Current” view