Kathrein UFS 923 Operating Manual Download Page 124

Page: 124 / 148

124

Edit Transponder

By pressing the



button you can call up

the input screen which allows you to edit/
change the settings of the transponder you
selected previously.

Frequency:

The selected transponder you want to edit
is shown here. The transponder frequency
cannot be changed.

DVB Type:

Here you select whether standard channels (DVB-S (SD)) or HDTV channels (DVB-S2 (HD)) are to be
received via the selected transponder.

Error rate:

You only need to enter the error rate if the transponder is for reception of HDTV channels (DVB-S2 (HD)).
You can choose between the following error rates: QPSK 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 or 8PSK 2/3,
3/4, 3/5, 5/6, 8/9 or 9/10.

Polarisation:

Here you select the applicable polarisation for the selected transponder - either “Horizontal” or “Vertical”.

Symbol Rate:

Use the number pad to enter the corresponding symbol rate.

When all settings have been made, press the



button to save the changes.

Main Menu - Settings

New Transponder

By pressing the



button, you can call

up the input screen for storing a new tran-
sponder. The following on-screen display
will appear:

Frequency:

Use the number pad to enter the transmis-
sion frequency for the new transponder.

Summary of Contents for UFS 923





















































































































































Search results

Summary of Contents for UFS 923

Reviews:

Related manuals for UFS 923

Brands by name

Popular brands

Kathrein UFS 923, Operating Manual

Search results

Summary of Contents for UFS 923

Reviews:

Related manuals for UFS 923

Brands by name

Popular brands