Kathrein UFS 822si Operating Manual Download

Page: 89 / 156

Use the

(blue) button to choose between TV and radio recordings within the recording list.

By pressing the

(green) button, you can sort recordings according to the following criteria:

-  Date of recording (ascending)
-  Duration of recording (descending)
-  Duration of recording (ascending)
- Channel

(descending)

- Channel

(ascending)

-  Name of recording (descending)
-  Name of recording (ascending))
-  Date of recording (descending)

Select the desired recording with the

buttons and press

to start playback. The recorded

programme will be displayed full-screen. The next time the recording list is called up, the last mode (TV/ra-
dio) and sort type will automatically be displayed.

PLAY RECORDINGS (NORMAL VIEW)

RECORDING LIST

Summary of Contents for UFS 822si





























































































































































Search results

Summary of Contents for UFS 822si

Reviews:

Related manuals for UFS 822si

Brands by name

Popular brands

Kathrein UFS 822si, Operating Manual

Search results

Summary of Contents for UFS 822si

Reviews:

Related manuals for UFS 822si

Brands by name

Popular brands