Kathrein UFS 822si Operating Manual Download

Page: 29 / 156

OPERATING INSTRUCTIONS

The structure of the menu concept is based on logical operating sequences. The programme showing
on the current selected channel always appears in the top right-hand corner of the screen.

You will fi nd detailed descriptions of the selected menu items in the relevant sections of the
operating manual!

Note:

The selected menus, sub-menus and positions, as well as the parameters to be set, are
each highlighted in colour. The menus are self-explanatory.

Press the

button to call up the main menu and press the

buttons to call up the sub-menus.

Press the

button to access the sub-menus. Press the

buttons to select items within the sub-

menus.

The settings under the various options are made either by pressing the

buttons or by using

the numeric pad. You can exit the main menu and sub-menus, and the various options, step-by-step

by pressing the

button (the settings/changes you made are saved). Press the

button to return

directly from one of the menus to the TV picture (the settings/changes you made are saved).

MENU CONCEPT

Also pay attention
to the bars at the
bottom of the on-
screen display!
These provide

information on what to do
next.

Summary of Contents for UFS 822si





























































































































































Search results

Summary of Contents for UFS 822si

Reviews:

Related manuals for UFS 822si

Brands by name

Popular brands

Kathrein UFS 822si, Operating Manual

Search results

Summary of Contents for UFS 822si

Reviews:

Related manuals for UFS 822si

Brands by name

Popular brands