4
IMPORTANT INFORMATION
The channels available on the satellites and transponders are subject to continual change. In such cases, it is
necessary to reset the channels as the factory preset programming corresponds to the situation on the date
of manufacture. The information for these settings can be found on the Internet or in relevant magazines.
Your receiver is factory fi tted with the latest software version. We are, however, constantly working on
adapting the software to the wishes of our customers and to developments in technology. The “Software and
Programme List Update” section contains additional information.
To connect your PC/laptop to the receiver over the network and to use the functions of the PVR
Manager , you must have unlimited rights (administrator rights) on your PC/laptop and on your net-
work.
Please keep the original packaging in case you need to return the product at any time!
Due to their design, hard disks are liable to damage by impacts; they are adequately protected within
the receiver only when it is in its original packaging.
If the product is not properly packed, the warranty on the hard disk is invalidated.
Any modifi cations to the receiver software, or the use of applications not provided by Kathrein, will
invalidate the warranty!
You will have to bear the costs yourself for dispatching and repairing any receiver that requires
attention due to modifi cations to the software and use of applications other than those provided by
Kathrein!
Therefore exclusively use only software and applications provided by Kathrein for your receiver.
These are available by downloading from the satellite or from our Internet pages (www.kathrein.de).
Make a note of the receiver's basic settings, so as to be able to restore them if necessary!
Make sure that neither the fans on the device‘s rear panel nor the ventilation slits are covered or
blocked. If so, the device may overheat. Fire hazard!
Included in the software for this receiver is software that is licensed under the GNU (General Public
Licence). The source code of the program is obtainable under: http//:www.kathrein.de/linux/receiver/
ufs822/
DiSEqC™ is a trademark of Eutelsat.
