2 / 10
EXD 1524
Configurable single-cable multi-switch
for up to 24 user bands and external
power supply unit for the LNB supply
Kathrein Power-Saving can be
selected and switched off using the
rotary switch
NCF 18
Highly efficient, short-circuit-proof
switched-mode power supply unit in
compliance with the ERP guideline
EXD 2524
Configurable loop-through multi-switch
to extend the system by adding two
single-cable connections for up to 24
user bands
Kathrein Power-Saving:
As soon as there are no longer any
receivers active, a signal is generated
at the last multi-switch via the vertical
low trunk. This signal then switches
the LNB power supply off.
Optional power supply using the NCF
18 possible.
The integrated AGC (Automatic Gain
Control) ensures that the Sat IF signals
have a constant output voltage and
more reserve in the distribution
Multi-tuner devices, e.g. UFS 926, can be
supplied with a multitude of user bands on
one drop cable
PIN code: User frequency protection
from being accessed by another user.
This enables installation across more
than one residence
Up to eight multi-switches can be
cascaded
Due to the energy-saving concept, the
multi-switch consumes no energy from
the NCF 18 if all receivers are switched
off If Kathrein Power Saving is active,
the power supply for the LNBs is also
turned off.
LED as an installation aid and for trouble-
shooting
QR code for installation examples and
instructions for use
For indoor installation
Tip
Bear in mind that you can also retrieve these instructions for
use by means of the left QR code on the front panel of the
multi-switch:
Scope of Delivery
EXD 1524
●
EXD 1524
●
NCF 18
●
Instructions for Use
EXD 2524
●
EXD 1524
●
Instructions for Use
Transport and Storage
►
Transport and store the device in its original packaging.
►
Make sure there is no water condensation build-up.
