15
GETTING STARTED
In the next menu press the
[1]
or
[2]
button to defi ne the measure-
ment unit the level is to be indicated. Press
[OK]
to keep the current
setting.
The next menu prompts you to set the mute function using the
[1]
or
[2]
button. If you select ON, the MSK 125 is switched to silent
as long as the incoming signal on the RF input is below 30 dBµV.
Press
[OK]
to keep the desired setting.
After you have set the low-level mute you automatically exit the third
setup menu.
2. Setup menu
3. Setup menu
DEFAULT SETUP SETTINGS AT TIME OF SHIPMENT
Parameter
Setting
LNB DC
OFF
LEVEL
dBµV
LOW LEVEL MUTE
ON
MAINS AND BATTERY OPERATION
The MSK 125 can be operated on the mains or by means of its
integrated battery.
MAINS OPERATION
Remove the supplied AC power unit (100 V...250 V) from the
packaging and connect it to the device and mains.
The integrated lithium-ion battery and the green LED next to the
[ON/OFF]
button indicate the external power supply.
For mains operation use only the supplied power unit. The power
unit is connected to the XLR power supply socket on the left side of
the device.
For longer times the devices is not used it should be connected
to the mains occasionally (trickle charge).
Note: A 12 V vehicle supply cable can be obtained through our
customer service (company ESC, address see page 51) (article no.:
19700841BF).
