3 / 12
CAUTION!
Risk of damage to the device if operated in inappropriate ambient conditions!
►
Install the device in dry indoor areas only. Do not install on or against
highly combustible materials.
►
Make sure that the devices are equipped with an equipotential bonding
conductor (Cu, at least 4 mm2).
►
Make sure to comply with the safety regulations set out in the current EN
60728-11 and EN 62368-1 standards.
►
Fixings: Screws, max. Ø: 4 mm
►
Connectors: RF connector 75 Ω (F series) to EN 61169-24.
►
Terminate any unused RF ports with 75-Ω resistors, e.g. EMK 03.
►
To meet EMC requirements, the only power supply unit allower to be used
is the NCF 18.
Danger of property damage!
If the inner cable conductor diameter is more than 1.2 mm, or if burring is
present, the device sockets may be destroyed.
Max. 2 mm
excess length
Clamping torque
max. 3.4 Nm
(danger of over-
winding)
Diameter
0.6 - 1.2 mm free of burrs
Installation Instructions
Hereby, KATHREIN Digital Systems GmbH declares that the radio equipment type
EXD 1532, order no.: 20510104/EXD 2532, order no.: 20510105
is in compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
www.kathrein-ds.com
Simplifi ed EU Declaration of Conformity
