2 / 12
EXD 1532
Confi gurable single-cable multi-switch
for up to 32 user bands, static mode
and external power supply unit for the
LNB supply
Kathrein Power Saving
can be selected
and switched off using the rotary
switch
NCF 18
Highly effi cient, short-circuit-proof
switched-mode power supply unit
EXD 2532
Confi gurable loop-through multi-
switch to extend the system by two
single-cable connections for up to 32
user bands or static mode
Kathrein Power Saving
:
As soon as there are no longer any
receivers active, a signal is generated
at the last multi-switch via the vertical
low trunk. This signal then switches
the LNB power supply off
Optional power supply of the multi
switch using the NCF 18
(LNB is not
supplied!)
EN 50494 single-cable command set
and the new, extended EN 50607 (SCD
2) command set are supported
Future-proof due to wideband tech-
nology (broadband inputs); two satellite
positions are possible using two wide-
band LNBs
The integrated AGC (Automatic Gain
Control) ensures that the Sat IF signals
have a constant output level and more
reserve in the distribution
Multi-tuner devices can be supplied with a
multitude of user bands on one drop cable
Up to eight multi-switches can be
cascaded
Due to the energy-saving concept, the
multi-switch consumes no energy from
the NCF 18 if all receivers are switched off .
If
Kathrein Power Saving
is active, the power
supply for the LNB is also turned off
LED as an installation aid and for trouble-
shooting
For indoor installation
EXD 1532
●
EXD 1532
●
NCF 18
●
Instructions for Use
EXD 2532
●
EXD 2532
●
Instructions for Use
Scope of Delivery
Transport and Storage
Intended Use
The equipment described is designed solely for the installation of satellite receiver
systems.
Any other use, or failure to comply with these instructions, will result in voiding of
warranty cover.
►
Transport and store the device in its
original packaging.
►
Make sure there is no water condensa-
tion build-up.
