936.3654/-/ZWT/0110/e - Technical data subject to change.
Technical Speci
fi
cation
¹
)
At mid-band
²
)
G/T at 11.3/12.5 GHz under standard ambient conditions (clear sky)
³
)
At a dynamic pressure of 800 N/m² to EN 60728-11
All
fi
gures are typical values!
If the maximum load is exceeded,
parts could break away!
Type
CAS 06
CAS 60
Order no.
20010005
20010006
Diameter
cm
57
57
Colour
White (similar to RAL 9002) Graphite (similar to RAL 7012)
Reception range
GHz
10.70-12.75
Antenna gain at
10.70-11.70 GHz/11.70-12.50 GHz/12.50-12.75 GHz
dBi
34.9/35.5/35.9
Half-power beam width ¹
)
°
< 2.8
Figure of merit ²
)
Central feed system
UAS 571/572/584/585
UAS 481
dB/K
14.7/15.7
14.0/15.0
Figure of merit ²
)
Feed system spacing 6°
UAS 571/572/584/585
UAS 481
dB/K
14.3/15.3
13.6/14.3
Figure of merit ²
)
Feed system spacing 9°
UAS 571/572/584/585
UAS 481
dB/K
13.6/14.4
12.9/13.7
Cross-polarisation decoupling
dB
> 27
Wind load ³
)
N
300
Max. allowable wind speed
km/h
157
Mast clamp range
mm
38-60
Setting range Elevation/Azimuth
°
5-45/360
Dimensions
(width x height max. x protrusion max. from mast centre without feed system)
mm
599 x 759 x 528
Packing unit dimensions
mm
800 x 655 x 200
Weight approx. net/gross
kg
4.8/5.6
Warranty conditions for the antenna corrosion resistance
Important instructions relating to the warranty conditions for the
corrosion resistance of Kathrein offset parabolic antennas:
●
The antenna must be assembled and mounted professionally, following the steps described
in the enclosed instruction sheet
●
The antenna must not be modi
fi
ed (e.g. by drilling)
●
The antenna must not be damaged mechanically (e.g. deformation, deep or extensive damage,
or abrasion of the powder coating and surface coating)
●
The antenna must not be damaged due to exposure to chemicals (e.g. solvents, lacquers,
detergents or the like)
●
Only genuine Kathrein accessories may be used for the antenna
These warranty conditions are effective from the date of purchase.
Only the original sales slip is acceptable as proof of purchase for warranty claims.
Furthermore, corrosion resistance is not warranted for the consequences of force majeure, e.g. lightning strike, or if the antenna is
used in regions where frequently occurring, abrasive weather conditions may wear off the protective coating within a short period of
time (e.g. sandstorms).
Internet: www.kathrein.de
KATHREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 • P.O. Box 100 444 • 83004 Rosenheim • GERMANY • phone +49 8031 184-0 • Fax +49 8031 184-385