background image

10 / 32

It is essential to select the correct installation site. This determines whether your parabolic antenna can be erected safely and 
perform to its optimum capabilities.

When selecting the installation site, take account of special features of the structure of the building. If the installation is at the 
edge of the roof or the building or on a cylindrical structure, DIN 1055, parts 4 and 4131 speci

fi

 es the increased wind and vibration 

loadings that should be allowed for. The dynamic properties of the antenna and the structure can mutually in

fl

 uence each other and 

cause detrimental changes.

Disregarding these considerations can lead to the maximum load or vibration fatigue stress listed in the Technical Data being 
exceeded. 

The parabolic antenna need not necessarily be mounted on the roof

, since the requirement is not height as such but 

an unobstructed “view” of the satellite. For this reason, an appropriate installation site might also be found for instance in the garden, 
on the terrace, on the face of the building or on a garage.

In fact if other sites are possible it is better to avoid the roof.

 This will result in less work for you and will reduce the hazards 

associated with installation work on the roof!

•  Under no circumstances install antennas in the vicinity of overhead power cables, otherwise the required clearances, 

which are absolutely essential, may no longer be satis

fi

 ed. Maintain a clearance of at least 1 m from all other electrical 

equipment in all directions!

  If you or metal parts of the antenna touch any electrical device there is a serious risk of a fatal electric shock!

•  Never work on antenna systems during a thunderstorm or when a thunderstorm is approaching.

  There is a risk of a fatal electric shock!

Basic Safety Precautions

•  Never install antennas on buildings with easily 

fl

 ammable roof coverings such as straw, rushes or similar materials!

  Otherwise there is a risk of 

fi

 re due to atmospheric over-voltages (static charges) or lightning discharges 

(e.g. during thunderstorms).

•  The installation operations described here assume good craftsmanship capabilities and knowledge of the behaviour of 

materials under the effects of wind. Therefore if you do not possess the required skills, have this work performed by a 
specialist.

•  The person doing the work must wear strong non-slip footwear, must not be liable to dizziness, must be able to move 

around safely on the roof and have a secure standing and attachment position (if necessary, wear a safety harness 
when on the roof).

•  Make sure that the roof is able to bear your weight. Never walk on fragile or unstable surfaces! In case of doubt, 

contact a quali

fi

 ed specialist dealer or specialist roo

fi

 ng contractor to 

fi

 nd an appropriate installation location.

•  Do not go on to roofs or other high places without a correctly attached safety harness that is in good condition. 

Otherwise use a work platform.

•  Ladders or other means of climbing must be in faultless condition (dry, clean and non-slip). Never build any irresponsible 

“scrambling towers”!

•  If there is a risk that passers-by may be injured by items falling from above during installation, you must close off the 

risk area using barriers! Make sure that no-one is underneath the installation location.

  Risk of death or injury due to falling from the roof, falling through the roof and falling parts, plus the 

possibility of damage to the roof.

•  The respective national safety regulations and current standards such as DIN EN 60728-11 should be complied with.
•  Any other use or failure to comply with these instructions will result in voiding of warranty coverage.

Before you install, connect or use the parabolic antenna, make sure 

that you comply with the instructions in this manual

If you disregard these instructions,
•  malfunctions may arise, creating 

risks

 to your life and health,

•  defects in the installation or the connection may cause 

damage

 to the antenna or to the attachment point,

•  the manufacturer will 

not

 accept 

liability

 for malfunctions and damage arising!

When working on antenna systems, please remember your 

duty of care towards your fellow human beings!

Keep the manual for any questions that arise later, and if the building passes to another owner, pass it on to the new owner!

Selecting the installation site

Summary of Contents for 20010005

































Reviews: