71
Lateral position of the left mold support
1.
On the
left
side, the correct position of the mold support is achieved when
there is a 2-3 mm gap between the furnace insulation and the mold bracket.
Adjust if necessary, by loosening the jaw’s screws, moving the tubes and re-
tightening the screws. Those screws should be on real tight.
2.
Ensure that the two left-side cantilever tubes extend by the same length.
2-3 mm
Locking pin
Summary of Contents for K2 Prime
Page 1: ...Automatic fluxer 2...
Page 2: ......
