70
An exception is when very thick (>2 mm rim/edge thickness) molds are used;
in those cases only, the mold cantilever tubes’ bottom should be positioned
2 mm under the bottom of the crucible ceramic axle.
2.
To adjust height, loosen the mold cantilever tube height adjustment screws,
move cantilever tube to correct position and re-tighten screws.
IMPORTANT:
Make sure that the adjustment plate remains aligned/parallel
within the rectangular cutout in the holding arm.
3.
Repeat with other side’s mold cantilever tubes.
Adjustment
screws
Summary of Contents for K2 Prime
Page 1: ...Automatic fluxer 2...
Page 2: ......
