Katanax K2 Prime, Manual

Page: 23 / 93

21
The last two buttons (bottom left and right) are equivalent to the orange left and
right recipe selection arrows.
To start a fusion program, it is therefore just a matter of scrolling through the
programs with the right/left arrows (with either the side pushbuttons or touch-
screen soft-buttons), and then pressing Start.
Loading a
program
Changing the current program can be made in several ways.
Touching the program number will call the program selection screen.
Touching the left or right arrows on either side of the program name will also call
the program selection screen, but will also decrease/increase the program
number. This can also be done by pressing the Left or Right mechanical buttons.
In the program selection screen, you can use the left or right arrows to scroll
among the proposed programs, or you can directly select the desired program by
touching its name.
Touch the green button to confirm, or the red to cancel.
Stop
/ Cancel
Start
/ Pause
/ Select
Left
Right