26
26
STARTING A MASSAGE
•
Ensure remote power is ON.
•
Use the Remote navigation arrows to scroll through the menus. As you navigate the menus, the yellow highlight
indicates where the cursor is within the menu.
•
Once your desired selection is highlighted, press the OK button to activate the selection.
•
Massages that automatically combine the massage mechanism, air massage, and other features, are offered in the
Auto menus.
•
Manual menu options activate a specific back mechanism function or set of functions.
•
Massages within the Airbag menu are those that activate only the air cells.
SHOULDER SCAN & SCANSAVE
To experience a massage as intended, it is extremely important to define the shoulder position prior to the start of
a massage session. To ensure massage accuracy, please follow the steps below:
When the head pillow is properly placed...
•
The massage chair will Auto-Detect shoulder position. During this process, the remote will read “Body Scanning”.
•
Fine Tune Shoulder Position: Once Auto-Detect is complete, the remote will beep. At this time, roller position can be adjusted
by pressing and holding the Up or Down arrows until the mechanism is located in the proper position
(at the top of the shoulders).
•
ScanSave remembers your body profile for all massages performed during the same power cycle. The chair will only scan once
while powered on, upon the first massage selection. If a second program is selected the scan from the first program is
remembered and used for the new selection.
NOTE: Fine Tune Shoulder Position lasts approximately 15 seconds before the shoulder position is stored and used for all
massage choreography.
NOTE: Shoulder scan detection does not occur when selecting Manual or Airbag massages.
MASSAGE MECHANISM SPEED ADJUSTMENT
Speed, or the pace at which the massaging movements of the massage mechanism occur, can be adjusted between Level 1 and
Level 5 (within the menu settings of the selected massage). The default setting is Level 3.
To adjust Speed using the menu settings of the selected massage...
•
If not already there, press Menu to access the Main Menu. Use the navigation arrows, located in the center of the remote,
to navigate to the active program, then use the right arrow to scroll to Speed adjustments. Once the desired speed is
highlighted, press OK to select.
OPERATION & USE
Summary of Contents for 700
Page 37: ......
