Faucet Attachment Kit Set-up
To attach the Combi to a water faucet:
1)
Position the black rubber gasket into the opening in the middle of the base. Screw the Combi
tightly onto the base.
2)
Insert the outlet tap into the smaller opening at the edge of the base.
3)
Slide red hose connector on to white hose with threads towards end of hose. Attach the white
hose to the input barb in the middle of the filter housing. Secure by tightening hose
connector clockwise.
4)
Unscrew the mixer jet from the water faucet and connect the diverter valve to the faucet.
Tighten the diverter valve to the water faucet. If diverter valve does not fit your faucet, install
using universal adaptor. (Figure 3-1)
Note: Additional adaptors can be found at your local hardware store if the universal
adaptor included does not fit your faucet.
Normal Operation
1)
Turn faucet on. Switch diverter valve so that water runs out of outlet tap. Note: the faucet will
be drip for a few seconds after shut off.
2)
The flow rate of the Combi Plus depends on the available water pressure and can be
increased through additional pumping (With pumping: Approx. 1 l/min at 1 bar, without
pumping: Approx. 0.6 l/min at 3 bar).
Warning: The Combi Plus has no return pressure regulating valve – the pressure built up at
the filter may exceed the pressure allowed for your other installations. Make sure the other
systems are protected by an overpressure valve.
For maintenance please follow the details of your Katadyn Combi filter.
Product Registration
Please take a moment to register your new Katadyn product by completing the short product
registration form online at www.katadyn.com/technischer-support/filter-support/produktregistrierung.
The information you provide will enable us to better serve you with products developed to meet
your needs and interests. Register your Katadyn product online and you will be automatically
entered into a drawing to win a free Katadyn product.
Limited Warranty
Your Katadyn Combi/Combi Plus Microfilter and the add-on kit are warranted for two (2) years
from the date of purchase against defects in materials and workmanship. Should your Katadyn
Combi prove defective within one year from the date of purchase, return it to the Katadyn retailer
from whom it was purchased. If you have any questions please contact Katadyn at
+41 44 839 21 11. Katadyn, at its discretion, will replace or repair the damaged item. Please
retain your purchase receipt as proof of date purchased. This warranty gives you specific legal
rights and you may have other legal rights which vary from state to state.
Contact International:
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal/Switzerland
[email protected] / www.katadyn.com
143850 Katadyn-B-int100591_a 01.12.14 10.22 Pagina 10