KAT VR KAT Walk Coord 2, Owner'S Manual, Page: 33 / 51

c. Walk source ( as in the game) : Check the game and find out what action triggers walking and set the
same here.
1. JStick/TPad: Push the Joystick/Touchpad to walk;
2. JStick/Tpad-Pressed: Press down and push the Joystick/Touchpad to walk;
3. A/X: Press A/X to walk;
4. B/Y: Press B/Y to walk;
5. Grip: Grab Grip button to walk;
6. Trigger: Press Trigger to walk;
7. None: Choose this option if you are playing a game without any walking function.
d. Run source: This function was designed to automatically enable the running speed in the games
with binary speed levels (always either walking or running at constant speed), once your real-life
speed on the KAT device reaches a certain speed threshold. Check the game controls and the
controller button bindings to find out which action triggers running in the game. Set it accordingly
in KAT Gateway.
1. Press and Push: Choose this option if the game needs you to first press and then push the
Joystick/Touchpad to run.
2. Press while Pushing: Choose this option if game needs you to press and push the Joystick/
Touchpad at the same time to run.
3. None: Choose this option if the game does not allow to run.
33
Haptic and Sitting