KAT VR KAT Walk Coord 2, Owner'S Manual, Page: 12 / 51

12
KAT Walk Coord 2 inner sensor Introduction
The KAT Walk Coord 2 Inner Sensor is mounted in the back-support plate to collect the body
direction data and transfer it into the game. The sensor has a
direction calibration button for a quick and easy calibration whenever needed.
Indication signals of a successfully paired sensor:
1.R LED light indicates the right sensor, and the L LED light indicates the left sensor;
2.LED light status indicators (Note: Battery status will be only displayed after successful sensor
pairing and connection);
3.Charging: Flashing Foot Sensor Light/Dimming Inner Sensor Light indicates charging.
Charging State Detected: Continuous bright lights and immediately turn to blink at same
frequency (with interval of 0.5s). ;
4.Normal operation: Normal, continuous light. Low battery: Slow, flashing light (3-sec
intervals);
5.Unpaired connection：Flashing light (1-sec intervals) ；
6.Pairing：Quick flashing light (0.5-sec intervals) ；
7.Sleeping mode / No power: No light.
Model
Input
Battery
WK321
5V 500mA
3.7V Li-Ion Polymer 370mA
Foot Sensor
Model
Input
Battery
WK322
5V 500mA
3.7V Li-Ion Polymer 370mA
Inner Sensor