KASEN KABBIT, Owner'S Manual

Page: 15 / 28

BATTERY TROUBLESHOOTING
Your e-bike battery uses several sophisticated monitoring systems to
prevent damage from overcharging, overheating, deep battery discharge,
charging with the wrong voltage, and other errors.
Please use the specific charger supplied with your bike. Other chargers
may not supply the correct voltage required for charging. Even if another
charger has the required voltage, it may not be programmed to initiate the
charge cycle. To resolve this:
1. Remove the battery from the bike.
2. Plug the charging tip into the battery.
3. Plug the charger into wall power.
4. Tap the power button on the battery once to turn it on.
5. Charge the battery overnight.
6. When charging is complete, put the battery back on the bike and
check for proper operation.
If a situation occurs that could damage the battery, the battery can go
into a protective "sleep mode" - the battery cells inside are OK, but the
battery won't turn on and won't take a charge. To "wake up" the battery,
please follow this procedure:
1. Put the battery on the bike.
2. Plug the charging tip into the battery.
3. Plug the charger into wall power.
4. Tap the power button on the battery once to turn it on.
5. Press and hold on the controls to turn on the display.
6. Allow the battery to charge overnight.