KASEN KABBIT, Owner'S Manual

Page: 25 / 28

t
Tianjin APT Science and Technology Co., Ltd.
1001, Building 5 HuaDing, No.1 HuaKe 3 Road,
7 TEL: 86 22 2634 5859
Binhai hi-tech Industrial Development Zone, Tianjin, China
FAX: 86 22 8371 9955
Email: apt@ap develop.com
Speed Limit
10 km/h
Speed Limit
25 km/h
Speed Limit
60 km/h
8.9 Poles in motor : Magnetic poles inside the motor, press UP/DOWN will change pole
number, range 0~10. Default value is 1.
Speed Poles
0
Speed Poles
1
Speed Poles
10
8.10 Start after poles : How many poles (speed sensor) need to be detected by controller
before starting motor. Default value is 3.
Start Poles
1
Start Poles
2
Start Poles
3
8.11 Assist levels : This parameter can customize assist levels, options are 3/5/9.
Assist
3
Assist
5
Assist
9
9
．
Error Code define
500C can show warning message, icon shows on the screen, and show error code at
the bottom of the screen, error code is from 01 E~07 E, and the definition see the table
below.
Error Code Error description Handle
01E Communication Error Check the cable connection
02E Controller protection Check three-phase power line.
03E three-phase power error Check three-phase power line connection
04E Battery low Charge the battery
05E Brake error Check the brake connection.
06E
Throttle error Check turn to connect.
07E Hall error Check the hall connection
08-99E Reserved Please contact the manufacturer for error definitions