IP Phone User Manual
10
/
42
LINE interface is used only for the phone which has PSTN function.
Microphone is used only the phone which has microphone connection port.
Caution:
Make sure that you plug the connectors of the handset cord in their ports completely
and securely.
3
Configuration
3.1
Introduction
Before you can use your KT101, you must configure its network connection type and
protocol parameters. To do so, you can use one of the following two ways: LCD-based
configuration and Web-based configuration.
LCD-based configuration: Configure parameters at prompts on the LCD by using the
buttons on your KT101. Web-based configuration: Configure on Web pages after logging
into the Web server built in your KT101 through a Web browser running on the PC
connected to your KT101.
You can select the one that best suits you.
Note:
Unless otherwise noted, the following configurations are only for demonstration purpose, other
than recommended settings. You can configure your KT101 by using the settings provided by
your carrier or administrator to suit your actual requirements.
3.2 LCD-
based
Configuration
The parameters of your KT101 are grouped by type in hierarchical menus displayed in the
LCD. You can use the buttons on your KT101 to perform menu operations and input
characters.
This section describes how to set by the LCD the network and protocol parameters
required for your KT101 to operate properly. Table 3-1 lists the basic button operations for
accomplishing all kinds of configurations.
Table 3-1 Basic button operations for LCD-based configuration
