IP Phone User Manual
24
/
42
I.
Upgrading the firmware
The [Upgrade Firmware] page is shown in Figure 3-13. The [Upgrade Firmware]
section is used to upgrade the firmware, while the [Version Info] section displays the
current software version and hardware version of your KT101.
Follow these steps to upgrade the firmware:
1) Consult your vendor or carrier for the recent upgrading file and save it to the
PC used to upgrade the firmware.
2) Enter the path of the upgrading file in the [Upgrade Firmware Name] text box,
or click <Browse…> and navigate to the folder where the upgrading file is
located and select it.
3) Click <Upgrade> to launch firmware upgrading.
4) The LCD on your KT101
displays the upgrading process. When it displays ―IP
Phone…‖showing that your KT101 is idle and ready for use, the upgrading
completes. After logging into the Web configuration interface again, you can
find that the software version is updated.
Caution:
Any power failure during the upgrading may cause your KT101 to operate improperly.
II.
Configuring time parameters
Click the [Time Setting] tab in the page shown in Figure 3-13. The [Time Setting] page
appears, as shown in Figure 3-14.
Figure 3-14 Web configuration-Time Setting
NTP Server Address: IP address or domain name of the NTP Server.
Time Zone: Time zone where your KT101 is located.
Note:
Your KT101 comes with a factory-set NTP server network address, through which it can
automatically acquire the correct time once it is set up and connected to the Internet. So do
not change the default NTP server address unless absolutely needed.
