HYDRA
FORCE
HYDRAFORCE LIFT STATION AGITATOR MANUAL
5
POST MOUNT CABINET INSTALLATION
Attach the Post Mount cabinet to a post or vertical wall (shed) with electrical service. Use the two provided
lag screws to mount the cabinet to the wall or post.
No key is required to open cabinet. Simply use a flat-head screwdriver.
1.
Drill two 3/16” holes vertically spaced 2-3/8”
apart.
2.
Using a standard 7/16" socket wrench, install both
lag screws into the wall or post, leaving the hex
head out about 1/4".
3.
Hang the cabinet from these screws using the keyhole slots on the backside of the cabinet. Tighten both
lag screws.
2-3/8"
1
2
3
Back to Contents
