background image

TWO YEAR LIMITED WARRANTY: 

Kasco Marine, Inc. warrants the C-10 Thermostat 
Control to be free from defects in material and work-
manship under normal use and service.  The Kasco 
Marine, Inc. obligation under this warranty is limited 
to replacing free of charge any defective part within 
two (2) years from date of purchase.  Customer shall 
pay all shipping charges. 
 
THIS WARRANTY IS IN LIEU OF ANY OTHER 
WARRANTIES EXPRESS OR IMPLIED, AND 
ANY OTHER OBLIGATION OR LIABILITY 
WHATEVER ON THE PART OF KASCO MA-
RINE, INC.  AND IN NO EVENT SHALL KASCO 
MARINE, INC. BE LIABLE FOR ANY SPECIAL 
OR CONSEQUENTIAL DAMAGES. 
 
No warranty registration is required, only original 
purchase receipt is needed for limited warranty cover-
age. 
    

Warranty is void

: If thermostat is damaged by unau-

thorized tampering or improper use. 
 
 
 

KASCO SERVICE PARTS: 

If the service parts listed below are not available from 
your local marine dealer, please order direct from Kasco 
Marine. 
 
F2400 (1/2 HP) “K” Propeller 
F3400 (3/4 HP) “J” Propeller 
4400 (1 HP) “M” Propeller 
Zinc Anode 
Electric Power Cable, 25’ length (16 gauge) 

Other lengths and gauges are available by special order. 

 
Specifications are subject to change without prior notice. 
 
All orders shipped via United Parcel Service. 
 
 
 
 
 
For Optional Kasco Parts or accessories, contact your lo-
cal dealer or call Kasco Marine, Inc. at (715) 262-4488. 

The Industry Leader in  

Ice Control Engineering. 

 

KASCO MARINE, INC.

   

800 Deere Road  

Prescott, WI 54021-1241 

 

Phone (715) 262-4488 *  Fax (715) 262-4487 

 

www.De-Icer.com  *  [email protected] 

12 

Summary of Contents for 2400D























Reviews: