ISTRUZIONI D’USO – USE INSTRUCTIONS –
GEBRAUCHSANLEITUNG – MODE D’EMPLOI -
INSTRUCCIONES PARA EL USO - Οδηγίες Χρήσης-Instruções
para o uso
IST-USO-0906004
Rev. N. 2 del 10/07/2018
IDP203
Pag.8 di 23
a) Example of powered respirator label:
The label is affixed both on the helmet and on the carton containing the
respirator.
b) Helmet label. Contains the following info:
Company logo
Product name and code
Serial number
c) Example of the label affixed to blower units:
d) Example of label affixed to batteries:
e) Example of label affixed to filters:
10 TRANSPORT
The powered respirator is to be kept in its original packaging during transport.
11. STORAGE
Store powered respirators and filters in their original packaging at a temperature
between 0°C and +40°C and a humidity lower than 80%.
12. WARNING
12.1 BEFORE USE CHECK THAT PRODUCT CODE NUMBERS, TYPE AND
QUANTITY OF SUB ASSEMBLIES CORRESPOND TO THOSE LISTED ON THE
RESPIRATOR COMPOSITION CHART.
12.2 Kasco retains any type of warranty forfeited on the instant and declines any liability
either direct or indirect should our Use and Maintenance instructions not be adhered
to and should filters and spares other than genuine Kasco filters and spare be used.
12.3 The liability for the proper operation of the respirator is irrevocably transferred to the
respirator purchaser or operator if:
a)
the prescribed maintenance is not carried out and/or repairs and maintenance
are carried out on the respirator Sby personnel not employed by or service
centres not authorized by KASCO.
b)
the respirator is used in a manner not conforming to its intended use as specified
in the relative product certification/approval.
12.4 IMPORTANT:
Adhere strictly to all instructions, labels and limitations pertaining to this equipment. If
instructions and warning are not adhered to at all times, respirator effectiveness will
diminish and wearer protection will be reduced.
The PPE, subject of these use instructions, has been CE certified as a Cat 3 PPE as per
Regulation (EU) 2016/425
and successive modifications by ITALCERT, Viale Sarca, 336 - 20126
MILAN, Notified Body 0426. The CE marking means the respect of the essential Health and Safety requirements contained in Annexe II of the
Regulation (EU) 2016/425
. The number 0426
following the CE mark identifies ITALCERT, the Notified Body responsible for Quality Assurance Control according to the
Regulation (EU) 2016/425.
Declarations of conformity may be downloaded from our website:http://kasco.eu/download-pdf/download-category/eu-declaration-of-conformity/
---------------------------------------------------------------------------------------------------------------------------------------------------
NOTES:
Operating temperature range
From 0°C to 40°C
Operating humidity range
From 0°C to 80%
Charging temperature range
From 0°C to 40°C
Below 0°C and above 40°C the battery may not accept charge
Equipment run time
See table at point 2.2
The equipment run time is strongly influenced by the conditions of the filter and other factors. The run time specified in the
table at point 2.2 assumes operation with clean filters and fully charged batteries. Different conditions will produce varying
run times.
Serial number
Reference standard
Product name and code
Company logo
