22
For folding umbrella
Illustration below is KP-09SS.
KP-09SS KP-12TS
■Compatible with all models listed here.
1
2
3
4
5
11
22
Lid
Side door
33
Offcuts
(Remove)
The round
green sticker
Lock pins
Umbrella bag
opening
44
55
Lid
Side door
1
Lift the lid on upper part
of the side of the main
body.
2
Push down on the
side door while pulling
toward you.
3
Face the side of the bags
with the
round green sticker toward the
main body
, fit it onto the lock pins, and
push in.
• You can install up to 600 bags. (There are
200 bags per pack.)
•
From the second and successive times,
be sure to remove any bag offcuts left
on the lock pins (refer to the left side of
diagram
3
).
• Leave no space between the packs.
4
Push down on the side
door while closing.
5
Close the lid on the upper
part of the side of the
main body.
• The umbrella bags have
been installed
♪
Folding umbrella bag holder
Illustration below is KP-99BKS.
KP-96BKS KP-99BKS
■Compatible with all models listed here. (For other models, this is an optional extra, sold separately.)
1
2
3
11
Hook cover
Umbrella
bag fixing
pins
22
Hook
The round green sticker
Umbrella
bag
opening
33
33
Hook cover
Left and right
holes on the
umbrella bags
Umbrella bag
fixing pins
Umbrella
bag
opening
Umbrella
bag
opening
1
Lift up the folding
umbrella holder
hook cover.
2
Hook the center hole
of the folding umbrella
bags on the hook.
• The front of the umbrella
bags is the side with the
round green sticker.
• You can install up to 200
bags (1 pack). (There are
200 bags per pack.)
3
After installing the folding umbrella bags,
insert the umbrella bags properly into the
holder. Then, as you press the hook cover
back down into its original position, insert
the umbrella bag fixing pins into the left and
right holes on the folding umbrella bags to
secure them.
• The umbrella bags have been installed
♪
*The folding umbrella holder is used by pulling and tearing off the bags.
Summary of Contents for KP-96
Page 14: ...14 ...
