21
English
Bag installation method
• Do not use bags other than genuine "Kasapon" bags (patented). Doing so may cause umbrella bags not to
attach properly, or cause the main body to malfunction.
We are not responsible for damage caused by use of any bags other than genuine "Kasapon" bags.
• Genuine "Kasapon" bags are made from polyethylene. Polyethylene will not release poisonous gas even
when burned, so the bags can be disposed of
as combustible garbage
.
For long umbrella
Illustration below is KP-99.
KP-96 KP-99 KP-96BKS KP-99BKS KP-51KK KP-99CB KP-09SS
■Compatible with all models listed here.
1
2
3
4
5
1
2
Side
door
Lid
3
Lock pins
Offcuts
(Remove)
The round
green sticker
Umbrella bag
opening
5
4
Side
door
1
Lift the lid on upper
part of the side of the
main body.
2
Push down on the
side door while pulling
toward you.
3
Face the side of the bags
with the round
green sticker toward the main body
,
fit it onto the lock pins, and push in.
• The KP-96 and the KP-96BKS hold up to 2,000
bags (10 packs), and other models hold up to 600
bags (3 packs). (There are 200 bags per pack.)
•
From the second and successive times, be
sure to remove any bag offcuts left on the
lock pins before installing the next set (refer
to the right side of diagram
3
).
• Leave no space between the packs.
4
Push down on the side
door while closing.
5
Close the lid on the upper
part of the side of the
main body.
• The umbrella bags have
been installed
♪
KP-03GS
1
2
3
4
5
Lock hook
Lock latch
Umbrella bag push plate
Handle
Lock pins
Offcuts
(Remove)
The round green sticker
Umbrella bag
opening
Lock hook
Lock latch
Umbrella bag push plate
Handle
1
Open the side door,
lift the handle on the
umbrella bag push plate
while pulling handle,
then hitch the lock latch
on to the lock hook
in the upper left hand
corner.
2
Face the side of the bags
with
the round green sticker
toward the main body
, fit it
onto the lock pins, and push in.
• You can install up to 600 bags (3 packs).
(There are 200 bags per pack.)
•
From the second and
successive times, be sure to
remove any bag offcuts left on
the lock pins before installing
the next set (refer to the right
side of diagram
2
).
• Leave no space between the packs.
3
Insert the
lower part
of the
umbrella
bags inside.
4
Lift up the handle on the
umbrella bag push plate
to unhitch lock latch
from the lock hook in the
upper left hand corner.
5
Check that the umbrella
bag push plate is in
contact with the bags,
then close the side door.
• The umbrella bags
have been installed
♪
Summary of Contents for KP-96
Page 14: ...14 ...
