6
PORTABLE BLENDER WITH 2 JUICE CUPS
SAFETY PRECAUTIONS
Warning: Be alert to the risks that may cause personal danger, serious injury and major
property loss.
1. The temperature of the food or liquid added into the mixing cup shall not exceed 40°C, so as to
avoid cracking of the cup, splashing and scalding.
2. The continuous operation shall not exceed 1 minute continuous, otherwise the product may be
damaged.
SAFETY PRECAUTIONS.
! Attention: pay attention to the risk that may cause personal injury or damage to objects
- This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
1. This product is only suitable for home use and should not be used for other purposes.
2. Do not run this product unattended.
3. Please check whether the main body, cup body and other parts are in good condition before
use. If any damage is found, please stop using. Do not disassemble and repair the product by
yourself to avoid affecting the product performance or causing accidents.
4. If the power cord is damaged, in order to avoid danger, it must be replaced by the manufacturer,
its maintenance department or professionals from similar departments.
5. Please do not plug in or pull out the power plug with wet hands to avoid electric shock. When
disconnecting the power supply, please hold the plug with your hand and pull it out. Do not pull the
power cord; Do not touch the power cord with sharp edges, sharp corners, etc. to avoid damage
to electric leakage.
6. It is forbidden to use this product with no load (no food in the cup) or overload (the amount of
food exceeds the rated value).
7. When installing the knife base assembly, please confirm that there is a sealing ring to avoid
leakage; Please confirm that the cup body and knife base components are installed in place; Do
not install the knife base separately on the main body.
8. Before using the appliance, please make sure that the container and the other parts are
correctly positioned to prevent it from causing injuries.
9. Please disconnect power before replacing parts or touching moving parts.
10. When the product is working, it is strictly forbidden to move the product, lift the cup or touch
movable parts such as blades and motors to avoid personal injury or damage to the product.
11. Before disassembling, installing, adjusting or cleaning any part of the product, please
disconnect power to avoid accidental startup of the product.
12. The continuous working time of the mixing function of this product shall not exceed 1 minute
continuous. If the expected effect is not achieved, please disconnect the power supply and cool
it for 2 minutes before processing; If the above functions are completed, please disconnect
the power supply and cool it for 2 minutes before processing. This is a work cycle. In case of
continuous operation for 3 cycles, the power supply must be disconnected and the product must
be cooled for 15-20 minutes before operation to ensure the product life.
13. If the blade is stuck, please turn off the switch and disconnect the power before cleaning to
avoid injury accidents or product damage.
14. When using the mixing function, it is recommended to add an appropriate amount of drinking
water or milk to ensure the mixing effect and product life.
15. If the product suddenly stops working when it is running, it may be a self-protection behavior
triggered by motor overheating. Please disconnect the power supply and cool it for 20-30 minutes
before use.
16. After the product is used, disconnect the power, and then remove the cup body after the blade
stops rotating to avoid accidents.
