3
SQUARE SPINDLE ASSEMBLY
1.
Assemble the square spindle in the front handle and ensure to fix with the split pin provided.
2.
Ensure the arrow symbol on the clutch piece is point UP or DOWN
3.
Fully unscrewing the lock by result in void warranty.
4.
If you do not assemble the spindle and install the lock on the door. You may need to damage the lock or
door for entry. Incorrect installation is not covered by warranty.
MECHANICAL KEY OVERRIDE
1.
Flick the black cap covering the mechanical barrel on the front handle. NOTE: It is attached to the lock so
do not snap the black cap off.
2.
Insert the mechanical key. Turn it 90 degrees. This will retract the door latch.
3.
If the mechanical key does not turn, it is the wrong key.
